Technical informations
Quartz is among the hardest mineral from the nature. The earth crest contains 12% of quartz that’s why, you will find in almost every country of the world. Each caesarstone slabs are produced in a mix of 93% quartz with high quality pigments and polymer.
The nominal dimensions of Caesarstone’s quartz slabs are 3,050 mm x 1,440 mm enabling greater design flexibility and maximum utilization of the product.
Dimensions and weights
Thickness | slab weight | kg/m² | slab dimesions |
---|---|---|---|
30 mm | 330 kg | 75 kg/m² | 3060 x 1440 |
20 mm | 220 kg | 50 kg/m² | 3060 x 1440 |
13 mm | 140 kg | 32 kg/m² | 3060 x 1440 |
Finitions
Polished:
Mat
Viento: innovative technology which give a mineral structure on a mat surface.
Performance Comparison
Caesarstone | 515 | 315 | 0,02 | 2200 | 2085 |
---|---|---|---|---|---|
Marble | 60 | 29 | 0,55 | 2161 | 2082 |
Granite (Rose Fiorito) | 134 | 29 | 0,33 | 1921 | 1906 |
Din Standard | 52112 | 2234 | 52103 | 52105 | 52104 |
Comparison
Caesarstone | natural stone |
laminate | solid surface |
|
---|---|---|---|---|
Scratch resistant | ♦♦♦ | ♦♦♦ | ♦♦ | ♦ |
Stain resistant | ♦♦♦ | ♦♦ | ♦♦♦ | ♦♦♦ |
Chip & crack resistantm | ♦♦♦ | ♦♦ | ♦♦ | ♦♦♦ |
Heat and burn resistant | ♦♦ | ♦♦ | ♦♦ | ♦♦ |
resistant to housholds chemicals, acids, solvents |
♦♦♦ | ♦♦ | ♦♦ | ♦♦♦ |
Low maintenance | ♦♦♦ | ♦♦ | ♦♦ | ♦ |
Non-absorbent & non-pourous | ♦♦♦ | ♦♦ | ♦♦ | ♦♦♦ |
Mold and mildew resistant | ♦♦♦ | ♦♦ | ♦♦ | ♦♦♦ |
Flexural strength | ♦♦♦ | ♦ | ♦♦ | ♦♦♦ |
Color consistency | ♦♦♦ | ♦ | ♦♦ | ♦♦ |
Immunity to freeze and thaw | ♦♦♦ | ♦♦♦ | ♦ | ♦ |
♦♦♦ Excellent | ♦♦ Good | ♦ Poor |
Certifikáty
CE mark means that the product comply why european union requirement and standrads.
NSF, thank to his waterproof surface, the product is anti bacterian, mold and mildew. The National Sanitation Foundation, guarantee that you can use this products in the food&beverage industry.
Caesarstone slab are ISOSO 14001, ISO 9001, OHSAS 1800.
Caesarstone slabs are granted by the GREENGUARD Environmental Institute, which reflects a low emission standard of production.
It’s tough, but not indestructible
Like any other surface, Caesarstone can be permanently damaged if exposed to strong chemicals and solvents that affect its physical properties.
Avoid the use of strong chemicals and solvents or highly abrasive cleaning agents such as oven/grill cleaners and dishwasher polishing agents that have pH levels higher than 11. Products containing oils or powders may leave a residue and should be rinsed off thoroughly. Never clean your Caesarstone surface with products that contain Trichlorethane or Methylene Chloride, such as paint removers or strippers.
Should your surface accidentally be exposed to any of these damaging products, rinse immediately with warm water to neutralize the effect.